FEATURES:

• 100% synthetic, provides best performance and maximum engine protection.
• Anti-corrosive and anti-oxidant, it is resistant to extreme off-road conditions.
• Container is convenient for precise dispensing
• Suitable for all seasons (-35ºC to + 40ºC)
• Facilitates cold starts
• Protects engine and gearbox
• Meets current manufacturer recommendations

For more information on this product visit IPONE.COM

The tire’s tread block geometry and void ratio work in partnership to ensure mud, rocks and water are expelled efficiently to provide a high level of grip and performance on tough terrain. The duo has also optimized the tire’s profile shape to provide a footprint that balances pressure distribution for even wear and an extended service life. A stair-step tread design also improves the tire’s self-cleaning capabilities to prevent stone drilling.

The TIS TT1 will be available in 19 high floatation sizes with an overall diameter range of 33in to 37in and will fit wheels with rim diameters from 17in to 26in.

Key Features and Benefits:

• Robust tread compound formulated to enhance durability by maximizing strength and puncture resistance in the most adverse driving conditions while prolonging tread life.
• Optimized profile shape that provides an ideal footprint for balanced pressure distribution to support even wear and enhanced longevity.
• Strategic tread block geometry and optimized void ratio– work in tandem to expel mud, dirt, rocks, and water and provide excellent grip in hi/lo speed situations, while reducing irregular wear caused by rugged terrains.
• Reinforced shoulder design – enhances overall strength at high-stress points while increasing grip, handling, and cornering confidence.
• Unique stair-step tread design – adds rigidity and improves self-cleaning capability by preventing stone drilling and debris retention

For more information visit: herculestire.com

FXR Pilot LE goggles pair perfectly with FXR helmets but are also a great choice to match up with other brands. The integrated outrigger system allows the Pilot LE goggle to fit perfectly inside the eye-port of most helmets. The lightweight, Poly-Flex urethane frame has a firm yet pliable feel for ultimate comfort and protection. The exclusive frame material allows the Pilot LE goggle to conform comfortably to a variety of face shapes.

The 3D contoured triple-density face foam provides the best anti-drip, sweat protection available. The air vent system induces maximum airflow while keeping unwanted dust and debris out, which also allows moisture and condensation to escape freely, preventing lens fogging in varied riding conditions.

The Pilot LE goggle includes the highest quality polycarbonate, shatter-resistant, anti-scratch, and anti-fog coated lens with 100% UVA protection.

Tear-off posts integrated into the premium lens for quick and easy tear-off installation. Anti-static smudge resistant goggle bag comes standard in every box.

The FXR Pilot LE goggle comes with a storage pouch that can be used for cleaning as well a spare CLEARIDIUM dual-layer Anti-Fog clear lens. There are also a variety of lens options to choose from.

DETAILS & SPECS

• CLEARIDIUM Anti-fog oversized, Impact resistant, pre-curved polycarbonate single lens
• Spare CLEARIDIUM dual-layer Anti-Fog clear lens included
• Premium Anti-Scratch and UV lens coatings
• 3D contoured triple-density face foam
• Rigid outriggers and soft frame for perfect fit & tension
• Moisture-wicking face fabric
• Premium strap with FXR silicone grip
• Removable nose piece
• Low-profile seamless ladder locks and strap-ends
• Soft storage/cleaning pouch included
• Tear-offs, accessories, parts and extra lens options available

For more information on FXR goggles and to find your perfect helmet and goggle setup, visit fxrracing.com

CKX understood this dilemma faced by many and created a single helmet that can easily be configured 3 different ways to best suit the needs of Road, Adventure and Enduro themed riding.

The new CKX Atlas helmet is a first of its kind and allows you to customize the helmet to suit your specific needs. In standard configuration the wide panoramic shield is perfect for higher speed on-road motorcycle riding.

Want to venture off the path with your adventure touring motorcycle or Side x Side, add the multi-position extendable peak which minimizes drag at higher speeds but can be extended for better deflection of mud and roost when off road.

For those which prefer to wear goggles, no problem, simply replace the shield with the CKX 210 degree goggles for Enduro style riding.

Key Features of the new CKX Atlas Helmet:

• Pivoting and removable muzzle for better air management
• Interchangeable panoramic shield for better adaptability without tools
• Patented push-button mechanism for quick helmet set-up
• Multi-Position extendable peak for effective protection from the elements
• Uncompromising protection: Fully compliant with North American and European Regulations

For more information visit: ckxgear.com

Superclamp has added a new product that solves this problem entirely. The “ATV / UTV Tie-Down Strap” kit doesn’t fasten to the chassis of your offroad vehicle at all. It fastens around the tire. Holding the unsprung part of your ATV or Side x Side confidently in place so there’s never any chance that the straps can come loose as the suspension compresses. This is how cars have been held down on flat deck car trailers for years and it works fantastic. This is the safest method of securing your ATV or side-x-side and is also the least stressful on suspension components.

The ATV UTV tie down strap kit comes with everything you need to secure one vehicle. 4 straps, 4 heavy duty ratchets with rubber coated handles and a set of 4, four-inch-long deck hooks. Each 1.5-inch-wide strap has a working load limited of 1,300-pounds. While you can use the supplied deck hooks and mount them at fixed distances apart from each other, we opted for a bit more adjustability and versatility and mounted Superclamp’s Supertracks to the deck of our trailer instead. By using the Supertracks we can easily adjust our anchor position forward and back for different vehicles we may need to haul.

All that’s required for installation is to ensure the deck hook is mounted between 3-4 inches out from the tire and at an angle slightly forward and back from the front and rear wheels. Slip the looped strap around the top third of the tire and tighten down the ratchet so that compresses the tire slightly. Repeat this same procedure at all 4 corners and you’re all set.

The difference in using this tie down system is immediately noticeable when you start towing. The vehicle will move up and down freely through its travel absorbing all the bumps and impacts from the road while keeping the vehicle secure and the tires firmly in place.

For more information on Superclamp’s full line of products visit superclamp.net

The grips allow you to choose between five different settings and focus on riding and not on the loss of feeling in your fingers. Oxford uses premium silicone cables that remain flexible in the coldest temperatures. Waterproof connectors and a rainproof switch are durable and will outlast the life of the grips themselves. Replacement grips are readily available if required.

Installation is simple since the Intelligent Heat Controller will detect a running engine without the need to tap into a switched circuit.

Features:

• Fits most 7/8″ handlebars
• Standard length: 5.12″
• Minimum cut length: 4.80″
• Grip outer diameter: 1.35″
• Waterproof connectors
• 5 heat settings give
• LED lights to indicate the level
• Up to 122°F (50°C)
• Rainproof switch
• Sonically welded
• 2 year warranty
• Replacement grips sold separately
• Power consumption: 48 Watts (4 Amps)

For more information and to order, visit kimpex.com

In the winter you’re looking for a balance of good traction and excellent clear-out so the lugs of the tire don’t get packed so tightly with snow that you lose all traction.

The 8-ply rated radial Terrahook tire features a balanced tread-to-void ratio ensuring a smooth ride on harder surfaces and this tire’s multi angle lugs make for a non-directional design that aggressively attacks slippery snow conditions. Its rubber compound remains grippy in cold conditions and delivers optimal traction required for use when plowing snow.

ITP might not classify this as an actual winter tire, but in our experience the three quarter inch deep lugs on this tire have proven to work impressively in soft snow conditions and the treads provide more traction across a wider variety of conditions.

For more information check out itptires.com

The TIS TT1 by Hercules is designed for recreational, off-road drivers and enthusiasts seeking a stylish, aggressive look. It features two distinct shoulder designs for individuals to customize their vehicle and an aggressive tread pattern design for excellent grip in extreme conditions.

The tire’s tread block geometry and void ratio work in partnership to ensure mud, rocks and water are expelled efficiently to provide a high level of grip and performance on tough terrain.

The duo has also optimized the tire’s profile shape to provide a footprint that balances pressure distribution for even wear and an extended service life. A stair-step tread design also improves the tire’s self-cleaning capabilities to prevent stone drilling.

The TIS TT1 will be available in 19 high floatation sizes with an overall diameter range of 33-inches to 37-inches and will fit wheels with rim diameters from 17-inches to 26-inches.

Key Features and Benefits:

• Robust tread compound formulated to enhance durability by maximizing strength and puncture resistance in the most adverse driving conditions while prolonging tread life.
• Optimized profile shape that provides an ideal footprint for balanced pressure distribution to support even wear and enhanced longevity.
• Strategic tread block geometry and optimized void ratio– work in tandem to expel mud, dirt, rocks, and water and provide excellent grip in hi/lo speed situations, while reducing irregular wear caused by rugged terrains.
• Reinforced shoulder design – enhances overall strength at high-stress points while increasing grip, handling, and cornering confidence.
• Unique stair-step tread design – adds rigidity and improves self-cleaning capability by preventing stone drilling and debris retention

For more information visit: herculestires.com

These tires are designed specifically for your truck or cargo van to help you navigate winter’s most extreme conditions.

The zig zag circumferential grooves featured on the Avalanche TT hold snow in the tread to stay gripped to the road and the saw-tooth features of the Snow-Grabber Grooves provide critical traction when the roads are nasty. Furthermore, their thin gauge, full-depth siping create more biting edges to deliver maximum traction on snow and ice.

The traction provided by the Avalanche TT winter tires lets us feel confident that even on a steep grade we can accelerate from fully stopped and come to a complete stop without sliding through an intersection.

Driving in the winter means driving in less than optimal conditions and we can rest comfortably knowing that our Hercules Avalanche TT winter tires are going to grip the road even in the harshest conditions and help get us to our destination safely.

Visit HERCULESTIRES.COM for more information.

When we say a huge line-up, we mean that physically as well. With offerings from 1,500-pounds all the way up to 17,500-pounds Erickson has even added in an AC winch, which is great for those needing extra pulling power where household 120-volt AC is available.

When it comes to DC powered winches this is the area where options are abundant from Erickson, including 4 models which are ATV and Side x Side specific. 3 are dedicated steel cable designs (3,000lb, 4000lb, 5,000lb) and one with synthetic rope.

The synthetic rope equipped model has a 3,500-pound load rating and comes equipped with a HASS style fairlead in red with a 1.1 horsepower motor. The 3,500-pound 50 foot, 3/16th gauge synthetic bailed winch from Erickson uses a 136 to 1 ratio and can bail back at 23.3 feet per minute unloaded and a very impressive 6.4 feet per minute at a full 3,500-pounds.

If you still require more pulling capacity, you can turn to Erickson’s heavy-duty winches available in 7500, 9500 12,000 and 17,500-pounds capacity.

Available exclusively at Princess Auto, the entire lineup of Erickson winches are built to last, no matter the challenge.

For more information visit princessauto.com